If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Anyone here have any experience with these motors? Specifically the carby on them?
I believe it is a Hitachi DCH306.
It gets fuel starvation when hot (I believe)
Selling parts in PerthI have a bit of A series gear for sale pref perth buyers because cant really be bothered organizing postage
A15 head suit rebuild
A15 inlet manifold with 32/36 adaptor
Unground cam pretty sure from a 1200
Lightend flywheel with exa clutch assembly
Stock a12 Flywheel
E15 dizzy with a series gear (just need coil & cap)
A12 gearbox worked well when removed form 120Y
welded 1000 diff twin solex carbs rebuilt for 2litre (Painted a horrible purple colour)
hilux diff lsd
p.m or ring 0439670400 if interested in anything
Found this on there you were looking for parts before hey?
Nah, not a dellorto carby at all.
I checked the routing of the fuel line and it looks fine, so I might rebuild the carb and see if I can find an asbestos gasket for it.
Definately evap/vapour lock though.
Ahhhh my Mum had a Datsun 1000 but it had the same (or similar) carby as the 1200 but it was definitely a Hitachi. I'll have a look when I get home and see if there is any old bits kicking around to give me an ID.
PS - you'll have to use gasket paper, you would be hard pressed to find gaskets for them now.
Full overhaul gasket set not sure if that would include carby gaskets? currently $41
Awesome. You can STILL get bits for them. I miss my Mum's old Datto. I wanted it so I could put an SR20 in it but my old man went berko when I said that, "I've had you and your bloody projects"
Online!Datto A12 motor...Carb help?
Posting for a mate.
Anyone here have any experience with these motors? Specifically the carby on them?
I believe it is a Hitachi DCH306.
It gets fuel starvation when hot (I believe)
Comment