Tweet
BMW MOTORCYCLES – SAFTEY RELATED RECALL
Constant product monitoring has identified that fuel leaks could occur at the fuel supply circuit on the following BMW motorcycles. A vehicle fire could occur as a result of the fuel leakage.
The VIN# (Vehicle Identification Number located on the motorcycle frame can compliance plate) ranges affect are listed below
Models Affected and affected VIN# Range
K1200 LT
ZD50460 to ZD54098
K1200 RS
ZA36468 to ZA37768
And ZG20000 to ZG30885
K1200 GT
ZK20000 to ZK25365
R850 C
ZC74491 to ZC74505
R1200 C
ZB18875 to ZB19571
R1200 C Independent
ZG00001 to ZG04145
R1200 C Montauk
ZF93000 to ZF94330
R1200 CL
ZJ15001 to ZJ17695
R1150 GS
ZE29147 to ZE29967
And ZJ00270 to ZJ14999
And ZL55000 to ZL61854
R1150 GS Adventure
ZH50000 to ZH61225
R850 R
ZB66619 to ZB74999
And ZJ85000 to ZJ87062
R1150 R
ZF15000 to ZF29999
And ZK60000 to ZK72201
R1150 R Rockster
ZJ45000 to ZJ50358
R1150 RS
ZG50000 to ZG55629
R1150 RT
ZE70000 to ZE84999
And ZK40000 to ZK59999
And ZM60000 to ZM62154
F650 CS
ZH00001 to ZH14366
R series Models.
This is due to the tension of the supply hose clamps and the position of the fuel supply clamps.
Quick release fuel line connectors require the o-ring sealing to be checked for leakage.
K series models.
Caused by the tightening torque settings of the fuel pump flange retaining ring and the immersion tube fuel level sensor gasket. The tension of the supply hose clamps and position of the fuel supply clamps also require checking
Quick release fuel line connectors require the o-ring sealing to be checked for leakage.
F650CS.
The pump flange can be affected by acidic material contact or unapproved cleaning agents containing acid.
BMW Group Australia is now conducting an Australia-wide recall on all affected models, and is contacting owners direct. However, if you own or ride on of the abovementioned motorcycles you should contact any authorised BMW motorcycle dealer without delay to arrange the listed items to be checked and rectified as necessary.
Should you have sold your motorcycle could you please contact BMW Group Australia as soon as possible and advise us of the new owner’s details.
The checking and rectification will be carried out at BMW’s expense
Further information about this recall can be obtained from
Any authorised BMW motorcycle dealer or BMW Group Australia
On Free call 1800 813 299
BMW Group Australia
783 Springvale Road
Mulgrave VIC 3170
Constant product monitoring has identified that fuel leaks could occur at the fuel supply circuit on the following BMW motorcycles. A vehicle fire could occur as a result of the fuel leakage.
The VIN# (Vehicle Identification Number located on the motorcycle frame can compliance plate) ranges affect are listed below
Models Affected and affected VIN# Range
K1200 LT
ZD50460 to ZD54098
K1200 RS
ZA36468 to ZA37768
And ZG20000 to ZG30885
K1200 GT
ZK20000 to ZK25365
R850 C
ZC74491 to ZC74505
R1200 C
ZB18875 to ZB19571
R1200 C Independent
ZG00001 to ZG04145
R1200 C Montauk
ZF93000 to ZF94330
R1200 CL
ZJ15001 to ZJ17695
R1150 GS
ZE29147 to ZE29967
And ZJ00270 to ZJ14999
And ZL55000 to ZL61854
R1150 GS Adventure
ZH50000 to ZH61225
R850 R
ZB66619 to ZB74999
And ZJ85000 to ZJ87062
R1150 R
ZF15000 to ZF29999
And ZK60000 to ZK72201
R1150 R Rockster
ZJ45000 to ZJ50358
R1150 RS
ZG50000 to ZG55629
R1150 RT
ZE70000 to ZE84999
And ZK40000 to ZK59999
And ZM60000 to ZM62154
F650 CS
ZH00001 to ZH14366
R series Models.
This is due to the tension of the supply hose clamps and the position of the fuel supply clamps.
Quick release fuel line connectors require the o-ring sealing to be checked for leakage.
K series models.
Caused by the tightening torque settings of the fuel pump flange retaining ring and the immersion tube fuel level sensor gasket. The tension of the supply hose clamps and position of the fuel supply clamps also require checking
Quick release fuel line connectors require the o-ring sealing to be checked for leakage.
F650CS.
The pump flange can be affected by acidic material contact or unapproved cleaning agents containing acid.
BMW Group Australia is now conducting an Australia-wide recall on all affected models, and is contacting owners direct. However, if you own or ride on of the abovementioned motorcycles you should contact any authorised BMW motorcycle dealer without delay to arrange the listed items to be checked and rectified as necessary.
Should you have sold your motorcycle could you please contact BMW Group Australia as soon as possible and advise us of the new owner’s details.
The checking and rectification will be carried out at BMW’s expense
Further information about this recall can be obtained from
Any authorised BMW motorcycle dealer or BMW Group Australia
On Free call 1800 813 299
BMW Group Australia
783 Springvale Road
Mulgrave VIC 3170
